Well, I may have just overlooked information technology, but I couldn't notice any info here on the fourm on how to fix a shift indicator that doesn't read correctly, then I went outside, and figured it out in a thing of minutes. Literally. I figured there was obviously a cablevision attached to the gear shift lever, and maybe, simply possibly a fashion to adjust it. Sure enough, at that place is. So, here is a write up on how to do information technology, with pics! Hope this helps some of yous if you were not sure how to fix it.

Tools Required:
7mm i/4 in. socket
ane/4 in. ratchet
Your alphabetize finger

Equipment Conditions:
Engine OFF.
Parking brake set.
Wheels chocked (just to be extra safe).

WARNING: Ensure parking restriction is fix and wheels are chocked. Failure to comply may upshot in injury or death.

1. Remove three screws (2) and driver side kicking panel (1) from instrument panel (3).

2. With transmission in PARK, turn adjusting spiral (4) counterclockwise to move orange indicator (5) left, and clockwise to move indicator right.

3. When orange indicator (5) is in desired position, shift gear selector (not shown) through all gears. If indicator is out of adjustment in any other gear, continue adjusting spiral (4) in that gear until indicator is in desired position.

four. Install driver side kicking panel (ii) on musical instrument console (three) with 3 screws (ane). Practise Not OVERTIGHTEN.

Once again, hopefully this helps. Maybe this can be a sticky??